Front Door Panel Removal And Replacement Hyundai Santa Fe 2006 2007 2008 2009 2010 2011 2012

Hi guys, welcome back to our mechanics today, we're going to show you how to remove and replace the door panel on a hand, a Santa Fe. This one is an old seven models, but it will be the same all the way from 2006 until 2012, stay with us. Don't, forget to subscribe and give us a like first thing that you will need to do. You need to remove that cover there by just pushing on top a little playing with the screwdriver. And there are two clips as you can see, you know, if you have a speaker there, you need to.

Press down and pull. And now we have the cover off next right here. There is one little bitty cap that we will need to remove with a small knife or a little needle. You can use because there is a screw there.

Also, there is another cap where the door handle is you just open this one. And there is one more cap right there. Okay, now we need to remove with a few of screwdriver with this.

Screw right here, careful not to lose them that screw in the door handle. This is again with that. Same Phillips.

Screwdriver just take it off. And now we need to remove the screw now have the lid under the door handle right here. And also there is one more screw than we need to remove, and it's down there. So you need to take this one off as well. Now you need to go on the bottom line here there is a slot.

Well, you can play with screw down or applying to and just apply some pressure. You will hear it the getting loose. Okay, there are also pretty tight sometimes, depending on the clips. Okay, you can hear them coming. Out writing, go ahead and pull that team around them in each handle it's all in the way. Okay.

Now we need to grab and pull off. It needs to come out of all places and just come out of the door handle right there. Okay like that. And now we need to unhook otherwise, depending on how many you have depending on the whole load.

The vehicle is okay, you just remove all the clips by pressing down and pulling out and that's the entire procedure as for removing the regulator. Okay, you can see, or if you need. To remove the switch for some reason it's pretty simple, hopefully the video clip will be the same folder from the right side as well. Thank you guys for watching us.